return to map of measurers

Measurer's contact details

Grade 1. Qualified to measure all events including National Championships.
Measurement Area: Cambs, Beds, W. Norfolk & W. Suffolk, N. Herts, & NW Bucks

The most recent courses measured by John Webber are:

certno	course_name	distance	datemeasured
2009060	Stevenage Half - Ridings Stad.	13 m 193y	2009-06-21
2009058	Stevenage Half - Ridings Stad.	13 m 193y	2009-06-21
2008070	Eastern Vets AC 6K	6K	2008-05-18
2008061	Cambridge Tri 5k - Impington	5 km	2008-03-13
2006114	Royal Engineers Half Mara 2006	13m 192.5 yards	2006-09-22
2006060	Eastern Vets 5 Reach	5 miles	2006-05-02
2006002	Huntingdon Frostbite 5	5 miles	2006-02-12
2005084	Twilight 20 m Walk- Kings Lynn	20 miles	2005-06-04
2005083	Kings Lynn 100 mile	100 miles	2005-06-04
2003043	East Cambs Half Marathon-Soham	13m 193y	2003-04-06

Last

Records 1 to 10 of 23

TO OBTAIN AN ARC CERTIFICATE OF COURSE ACCURACY:

Select a safe course and measure it as accurately as you can. (Use an OS 1:25000 map, a bike, a GPS, or, worst, a car)
Prepare a course map
Notify the police and follow any safety recommendations
Only after 1, 2 &3 are you ready to contact an accredited measurer and make an appointment for an accurate measurement. The measurer will make a charge (see guidelines) and you should ask for an estimate.
Supply the measurer with the following:
- A map of the course (he may ask for several copies for his report)
- Details of what part of the road will be available to runners. If not all the road and adjacent pavements are available, how will runners be stopped from taking short cuts? If you do not have sufficient means available to prevent short cuts, the measurer may have to measure using the full width available. This applies particularly on right hand corners where runners often ignore a race organiser's intentions to keep everyone to the left.
- Details of any other restrictions at corners.
- Details of any other places where runners might take short cuts e.g. on pavements - a number of small savings here and there can add up to something significant over the whole course.
- Intended location of start and finish, and how much flexibility is there for adjusting either or both.
- Agreement to pay the measurer's out-of-pocket expenses.
On the agreed day meet the measurer and show him the course. It is usually best to accompany him on a bike. But a car may also be suitable. On busy roads the measurer may need someone behind him to 'protect' him from the traffic as he concentrates on an accurate measurement. Busy courses may need to be measured at a quiet time, e.g. early on Sunday morning. You may find it worthwhile to consult the Safety Code for Course Measurement so that you have an appreciation of the procedures the course measurer uses to make the measurement safe. The course measurer will seek your help to ensure his safety while riding, and he might not be able to complete the measurement at a single visit if he discovers hazrds which he has not planned for.
After the measurement the measurer writes a report and sends copies to the race organiser and to the area measurement secretary, who issues the Certificate of Course Accuracy. Without a valid certificate or a renewal for subsequent races, any permit issued for a race advertising a specific distance would be invalid.